Digital DRX Transceiver
This innovative, low power, all-in-one “black box” is not just a robust a robust hardware platform. It also introduces world-leading cutting-edge technical innovations and incredible versatility for a variety of applications, from finding your catch and exploring new areas, to surveying and mapping. This opens up countless new opportunities for your operations.The DRX Transceiver is the heart of the WASSP system that provides live processing of your data to provide realistic sounder and mapping graphics.
It has the processing power of a supercomputer.
This is the core of all further developments.
DRX-46 with WMB-160 transducer: 1 to 400m
DRX-46 with WMB-80 transducer: 2 to 600m
DRX-46 is used with F3X & W3X models
CDX Operating System
WASSP Generation 3 introduces a new simplified WASSP CDX for control, visualisation and data management, while still providing a comprehensive set of functions to meet the most demanding fishing requirements.
• High resolution mapping
• Multi-resolution mapping has a single database that becomes more detailed the more you zoom in
• A clever algorithm takes best data from an old recording and new recording, providing for near-seamless mapping
• Great high-resolution single, triple and Quint beam sounder providing a very clear visibility of both water column and sea floor
• Single, triple and Quint beam high definition sounder F Series only
• Sonar view to give instant current sounder view
• Side scan when licensed
• 2D and 3D Mapping with or without Water column targets and Backscatter when licensed
• Simplified graphical user interface
• Focused on WASSP data presentation not multi-functional
• Presents in a very accurate raw manner with minimal data cleaning or averaging
• Enhances the core benefits of WASSP
• Multi resolution database with automatic, depth-adjusted, best resolution mapping that can be used in all depths zoom in for higher resolution
• Water column targets gain is aligned to give same colour in all modes
Highly Sensitive WASSP Transducer
With the highly sensitive WASSP WMB-80 transducer, you get much more depth than similar powered traditional sounders. With processing from very low comparable transmission power WASSP transducers give you very good clarity in both deep and shallow water.
Like many commercial fishing transducers, the WMB-80 is designed to be mounted in a sea chest. This gives you the flexibility to have a custom-made sea chest for your specific vessel.
While all transducers need as much separation from other sounders as possible and clean waterflow across the surface, the F3X with AKP and IMS allows a well-placed WASSP transducer to operate in a sea chest with other transducers.
Wideband Fairing Transducer
The Wideband Fairing Transducers frequency ranges from 90 to 190kHz and can chirp Plus or Minus 30kHz when driven by the DRX. Typically, this transducer is installed with middle frequency of 160kHz with Chirp cover of 130 to 190kHz it is just as comfortable with centre at 120kHz and Chirp range from 90-150kHz which can be adjusted in the DRX.
Refer to Terms & Conditions
WASSP WSP-038 Standalone Motion Sensor
WASSP WSP-038 standalone motion sensor with a 5m cable that connects directly to the RS422B port. This sensor is recommended for any F3X or F3 DRX after 389. It can be used with any suitable satellite compass. The sensor is RS422 so cable runs can be extended to almost any length.
WASSP Sensor box with WSP-038 Motion Sensor
This provides a termination point for the satellite compass and power and contains the WSP-038 motion sensor. A 5m premade cable then carries the combined power, heading, position and motion sensor data to the drx over a single 5m cable. Wired for RS232 input / output and designed for use with the V123 antenna.
SMC-108 is a motion sensor from ship motion control. It is used for higher end applications and survey when mapping with reduced motion errors is required.
The V123 is an all-in-one single-frequency, multi-GNSS smart antenna. It provides Atlas decimeter-level position and precise heading. This rugged design is sealed for harsh environments and is a great solution for professional marine and other challenging applications. The V123 combines easy install with consistent, precise heading accuracy and decimeter positioning.
The V200 offers an incredible combination of simple installation, small form factor, and amazing performance. The compass – measuring only 35 cm in length – mounts easily to a flat surface or pole. The stability and maintenance-free design of the Vector V200 provides simple integration into autopilots, chart plotters, and AIS systems.
The V500 is an all-in-one multi frequency, multi-GNSS smart antenna that provides RTK-level position and precise heading. This rugged design is sealed for harsh environments and is a great solution for professional marine and other challenging applications. The V500 combines easy install with consistent, precise heading accuracy and RTK positioning.
SATELLITE COMPASS™ (GPS COMPASS) SC-33
SATELLITE COMPASS™ (GPS COMPASS) SC-33 Satellite Accuracy, Unwavering Heading, Heading Accuracy of 0.4°, Strong against multipath, Multi-GNSS, NMEA2000 certified, Perfect for Radar, TT, AIS, Sonars and Autopilots.
SATELLITE COMPASS™ (GPS COMPASS) SC-70 GNSS
SATELLITE COMPASS™ (GPS COMPASS) SC-70 GNSS-powered high accuracy compass High precision and accurate heading of 0.4° (SC-70) Perfect for Radar, ECDIS, AIS, Doppler Sonar and Autopilot.
SATELLITE COMPASS™ (GPS COMPASS) SC-130 GNSS
SATELLITE COMPASS™ (GPS COMPASS) SC-130 GNSS-powered high accuracy compass High precision and accurate heading of 0.25° (SC-130) Perfect for Radar, ECDIS, AIS, Doppler Sonar and Autopilot.