Actisense NMEA 2000 to WiFi Gateway with Voyage Data Recorder
Actisense NMEA 2000 to WiFi Gateway with Voyage Data Recorder.
It transfers data from an NMEA 2000 backbone to any device (e.g. laptop, tablet or smartphone) connected to it via Wi-Fi.
It has built-in conversion of NMEA 2000 messages into NMEA 0183 sentences thus allowing a wide variety of vessel data (e.g. position, speed, course, wind speed, depth, engine data, AIS messages etc.) to be shared with NMEA 0183 compatible software applications running on connected devices.
All the data received (or a selected subset) can be logged to its internal micro SD card for later downloading to use for analysing the voyage. This is very useful for analysing race data, generating logbooks, diagnosing problems or even sharing your voyage details. Approximately 16 days of data can be stored on the pre-installed industrial grade micro SD card, which can be upgraded should the user require more storage.
The W2K-1 has the legendary Actisense “Reliability Built In” along with useful diagnostic LEDs, internal antenna, enhanced password security, full certification and all packaged in an extremely rugged IP67 case.
|Supply Voltage (NMEA 2000 Port)||9 to 36V DC|
|Supply Current (NMEA 2000 Port)||70mA (avg.) @ 12V DC|
|Load Equivalent Number (LEN)||2|
|Supply protection||Continuous reverse polarity protection and transient overvoltage protection to 40V|
|Compatibility||IEEE 802.11 b/g/n|
|Speed||802.11n up to 150Mbps|
|Frequency Band||2.4GHz ~ 2.5GHz|
|Max Output power||20 dBm|
|Antenna||Integrated internal antenna|
|Range (Open space)||30 meters|
|Security||WPA / WPA2|
|IP support||Supports TCP and UDP broadcast|
|Data servers||Three separate data servers|
|Data protocols||NMEA 0183, Raw CAN, BST-N2K|
|Security||SSID and Password configurable (Unique defaults per device)|
|NMEA 2000 Tx LED||Orange|
|NMEA 2000 Rx LED||Green|
|micro SD card||8GB Industrial Grade, FAT32|
|Housing Material (body)||Polycarbonate|
|Housing Material (endcaps)||PBT|
|NMEA 2000 Connector||M12 Male (A polarised) connector moulded into case|
|NMEA 2000 Connector Material||Nickel plated brass|
|Dimensions||106mm (L) x 73mm (W) x 24mm (H)|
|Operating Temperature||-20°C to +55°C|
|Storage Temperature||-30°C to +70°C|
|Recommended Humidity||0 – 93% RH|
Approvals and Certifications
|NMEA 2000 Certified|
|RoHS and REACH compliant|
|RF Module certification||FCC / CE-RED / IC / TELEC / KCC / SRRC / NCC|
|EMC||IEC 60945 (sections 9 & 10), EN 301489-1, EN301489-17|
|Radio||EN 300 328|